铜陵附近想过夜电话联系

Welcome to roots blower professional manufacturer website

News Center

What should be paid attention to when installing roots blower

Author: Hongguang roots blower Release time: March 3, 2020 18:30:36 Number of visits:

Key words: Roots blower installation

Preface

Due to Roots blower It is a high-speed fan, so it will produce vibration, and because of its internal air pulsation, it will increase Roots blower Vibration. So, Roots blower It needs to be fixed on the ground during installation. According to different fan models, dig a 150 * 150 mm square and 300 mm square pit on the ground, and embed the anchor bolts. Then, the fan is connected with bolts and nuts, and the square hole is filled with cement. After tightening the nut, the concrete seat can be fixed together Roots blower The vibration displacement in the process of operation improves the operation safety of the equipment, reduces the vibration and greatly prolongs the service life of the fan. The following is a small edition of Hong Guang Roots blower Please refer to the four items summarized during installation
 Site installation drawing of Roots blower

1: Life safety

 
No matter what work is done, the safety factor of human is the first consideration. Do not install the fan in the place where people often go in and out, so as to prevent injury and burn. Do not install the fan in the place where inflammable, explosive and corrosive gases are easy to occur, so as to avoid fire and poisoning accidents.
 

2: Space for routine maintenance

 
Sufficient space should be left around the base surface according to the direction of air inlet and outlet and maintenance needs.
 

3: Foundation

 
When installing the fan, check whether the foundation is firm, whether the surface is flat and whether the foundation is higher than the ground.
 

4: Installation environment

 
The blower shall be equipped with a separate fan room to avoid the wind, sun and rain all year round. When the fan is installed outdoors, a rain proof shed shall be installed. The fan can be used for a long time at an ambient temperature of no more than 40 ° C. When the temperature exceeds 40 ° C, cooling fan and other cooling measures should be installed to extend the service life of the fan. When transporting air, gas, natural gas and other special gas media, the dust content shall not exceed 100mg / m3.
 
Summary: the above are some precautions for Roots blower installation. I believe we will help you to have a basic understanding of the blower. When we need to buy a fan in the future, we can definitely buy and install it according to the above four points. And at the same time, they can better serve us. In the following article, roots blower manufacturers will release some operating precautions, please pay attention to this station.
       Note when installing roots blower: http://theoxfordjazz.com/xw/72.html
 

More related recommendations