(preferred): selection factors of Roots blower
Roots blower It has been widely used in industry and agriculture. What factors will affect it Roots blower Due to the different uses and working conditions of fans, the roots fans in each construction site and working system are different, which also leads to hundreds of fans Roots blower model The reason for the birth of parameters. At the same time, for some people who have not used or understood roots blower, the understanding and experience will be more complex.
1、 Factors of stress
Roots blower The pressure depends on the resistance of the outlet pipe and piping system and atmospheric pressure, so attention must be paid to the selection Roots blower The fan must be selected within the pressure value of the whole system. If the rated pressure is exceeded, roots blower will be in overpressure state and the motor may be burned. On the contrary, if Roots blower If the pressure is insufficient, the roots blower may not achieve the desired effect, which will cause adverse results to the whole system.
2、 Air volume factor
Air flow is also what we often say about flow Roots blower The most important part of the selection, generally its unit is how many cubic meters per minute, this value is the most important, so in the selection and design of the time must not be wrong, it completely determines the success or failure of the whole system, because some industries just need this value, no more or less!
3、 Speed factor
Roots blower The speed of the fan determines the air volume of the fan, and also affects the service life of the fan. Due to the wear of the rotor and casing of Roots blower, roots blower with the same parameters has different speed. The fan with lower speed will surely have a longer life than the fan with higher speed. So when we choose roots blower model, we choose the fan with low speed as far as possible. There is a correlation between the fan speed and the air volume (flow): when the shell volume is the same and the roots blower is the same, the air volume with high fan speed is smaller than that with low fan speed. Speed also directly affects the noise of the fan, the higher the speed, the greater the noise value.
Conclusion: therefore, in the Selection of Roots blower We try to fix the fan speed to meet our needs. At the same time, many factors will affect the selection of blower. With the increase and change of working conditions, there will be many challenges in our actual selection. However, if we carefully select according to the above factors affecting the selection of fans and maintain a serious and responsible attitude in the selection process, we will definitely choose a fan that is more suitable for our needs. Whether for customers or for themselves, the selection of blowers must be strict. Through careful selection, we can not only run smoothly according to our needs, but also save energy and environmental protection. Eliminate unnecessary maintenance and energy costs! I hope the above points can help you, especially for users who have not contacted but are about to contact roots blower. If you don't understand or do not understand, you can consult us at any time, and we will serve you wholeheartedly.
(preferred): selection factors of Roots blower: http://theoxfordjazz.com/xw/105.html
More related recommendations