Instructions for ordering Zhangqiu roots blower and inspection and acceptance after unpacking
1 Roots blower It is widely used in industry and agriculture Roots blower There are many models and performance, and customers are ordering Roots blower The following points should be explained clearly with the manufacturer, so as to give users accurate prices and construction period.
Roots blower Different parameters, these can be customized. If you need non-standard parameters, please tell me in advance. We can customize the fan according to your specific needs.
Roots blower The structure can also be customized, such as dense type. If your site area is limited, you can customize the dense type. If you need direct transmission, you can also customize it.
Import and export can also be customized, general clover Roots blower If you need other ways of air intake, you can also tell us how to customize it.
3. Driving mode
Roots blower The conventional drive mode is motor driven. If you need diesel engine drive or diesel electric dual-purpose drive, you can also customize it.
Roots blower If we need stainless steel or other materials, we can communicate with us in advance, and we can help you to customize.
The fan parameter range can be customized under certain conditions. By customization, we mean that the blower can be transported within the range, because the three leaf roots blower can not transport some special gases, such as high temperature gas, toxic gas, explosive gas, etc.
5. Supporting motor
Customers can specify the brand of motor to match, according to their own industry system and the requirements of the environment to choose the appropriate motor, if the customer does not specify the brand, then our manufacturer will match our standard motor.
2 Roots blower When leaving the factory, the parts and components have been well treated and packed, and the packing box shall be delivered to the installation and construction unit by the user after it arrives at the use site, and there are handover procedures for open box inspection. The content of the open package inspection here is similar to that of the user after receiving the goods, but its purpose is different. The specific contents of the inspection after unpacking are as follows:
1. Check the equipment packing list and check whether the machine parts are complete.
2. Check whether the main installation dimensions of impeller, casing and other parts (such as hole spacing of anchor bolts, hole diameter and position size of inlet and outlet flange, central height of axis, etc.) meet the design requirements according to the random technical documents.
3. Whether the rotation direction of impeller and the guide direction of stator guide vane are in accordance with the provisions of random technical documents.
4. Check the rust proof condition of the exposed machined surface of the blower and whether the main parts are damaged and obviously deformed. The key parts such as impeller and Journal of rotor, tooth surface and Journal of big and small gears must be inspected.
Conclusion: for the lifting of blower, attention should be paid to keep it stable and safe during lifting, do not damage the machined surface, and do not roll; when cleaning, the rotating parts (such as rotor and gear) should be thoroughly cleaned to avoid affecting the balance.
Instructions for ordering Zhangqiu roots blower and inspection and acceptance after unpacking: http://theoxfordjazz.com/xw/104.html
More related recommendations