"Inert gas pneumatic conveying system", roots blower to complete
Our company has established a complete pneumatic conveying system on the basis of independent innovation, which covers almost all forms of pneumatic conveying. We provide pneumatic conveying solutions for different problems. Today, I would like to share with you the inert gas pneumatic conveying system. We will introduce it in detail from the following aspects
1. System features:
The system uses Roots blower It is the gas source and the inert gas is the conveying medium to continuously transport materials. It has the characteristics of low pressure, reliable transportation and recycling of inert gas. Roots blower It acts as pressure blower and suction vacuum pump in the system. Flexible layout and long conveying distance
1. No leakage and no secondary pollution
2. Energy saving and high efficiency
3. Centralized transportation and recycling
4. It has more advantages in special powder transportation.
2. Performance range:
1. Conveying pressure: 29.4 ~ 196kpa
2. Conveying capacity: 0.1 ~ 50t / h
Distance: 200m ~ 30m
4. Pipe diameter: 50 ~ 150 mm
3. Main scope:
It is suitable for conveying flaky, powdery and granular materials with unstable chemical properties.
4. Working principle:
The material enters from the rotating feeder of the hopper, and under the action of gravity, the feeder feeds quantitatively. Roots blower The pressure gas is generated and the material is sent to the finger accumulator at a certain speed. After the separation of material and gas, the gas enters the intake pipe through dust removal and is inhaled into the air inlet of the blower for the next circulation transportation. For flammable, explosive and oxidizable materials, the protective pneumatic transportation of inert gases such as nitrogen or carbon dioxide is usually used. The inert gas is recycled in the closed system, which saves the operation cost. Using the air installed in the extraction system of the last extractor of inert gas pneumatic conveying, a negative pressure air flow below atmospheric pressure is formed in the conveying pipeline. Materials and atmosphere enter the pipeline together from the starting point suction nozzle, and the air flow is transported to a clutch with the inert gas pneumatic conveying, The material particles are separated from the air flow by gravity or centrifugation, and the dust removed by the gas is discharged into the atmosphere through centrifugal fan or air extractor.
Summary: we have transportation experience of more than 20 different powder and granular materials, and the company's material database has hundreds of material experimental data or transportation data. We will have a detailed understanding of the material properties and transport performance data before making the transportation plan. For materials that have not been fully understood, various properties of materials will be tested and transported in large transport laboratories. After in-depth understanding of the material characteristics, combined with the customer's process flow and requirements, select the appropriate conveying mode and conveying device. What we ultimately provide to users is to optimize the system configuration, balance fixed investment and operating costs, and provide users with practical alternatives when necessary.
"Inert gas pneumatic conveying system", roots blower: http://theoxfordjazz.com/qlss/145.html
More related recommendations